Question: How do you hook up an aftermarket radio without a harness?

Can you install stereo without wiring harness?

Depending on exactly what you mean by “wiring a car radio without a harness,” there are a couple of different ways to work the problem. If you have the factory harness, but not the harness that came with your head unit when it was new, then you can either buy an adapter—if one is available—or fabricate one yourself.

What is a radio bypass harness?

These amp bypass harnesses allow you to use the power from the new car stereo to drive your speakers rather than factory power. These harnesses tend to be more affordable than amplifier integration adapters (below), but can involve more work if the amplifier is in a remote location, like under a seat or in the trunk.

What color is the accessory wire?

Check for the Dimmer and Accessory Wires Its typically orange or orange with a white stripe. The wire that still shows 12V is the accessory wire, which is usually red in aftermarket wiring harnesses. If only one wire ever had power in this step, it is the accessory wire.

What is a car radio accessory switched 12V wire?

The wire that shows less than 12V at that point is the dimmer/illumination wire. Its typically orange or orange with a white stripe. The wire that still shows 12V is the accessory wire, which is usually red in aftermarket wiring harnesses. If only one wire ever had power in this step, it is the accessory wire.

What color is the reverse wire on radio?

Connect the Reverse ( Back ) Camera Detecting lead ( Blue color or Orange/White color in different model ) from radio harness with the positive terminal of Backup Light.

Write us

Find us at the office

Picardi- Katzung street no. 53, 78168 Tegucigalpa, Honduras

Give us a ring

Adella Nellums
+70 210 301 534
Mon - Fri, 10:00-14:00

Contact us